Miscellaneous Hardware

NOTE: Fret Wire Comes in 1 or 2 foot long sections. It takes 4 feet to do a banjo.

Standard modern banjo fret wire
Dimensions: Width- 0.08", Crown-0.040", Height-0.100"
244A-147-1 Fret Wire - One Foot $1.50

244A-147-2 Fret Wire - Two Feet $3.00

Slightly wider fret wire like Martin Guitar
Dimensions: Width 0.085, Crown-0.041 and Height-0.100
244B-148-1 Slightly wider fret wire - One Foot $1.50

244B-148-2 Slightly wider fret wire - Two Feet $3.00

1661 FRET PULLER
Makes it easier & safer to remove the old fret from your banjo (or guitar). $29.45

STRING NUT

Final shaping & slotting required
131-209 Banjo Simulated Bone Nut Price: $3.95

132-18F Banjo Genuine Bone Nut Price: $4.95

133-219 Mother-Of-Pearl Nut for Banjo Price: $12.95

135-21F 5th String Bone Nut l/8" diameter, Gibson style Price: $4.29

136-36 Mother of Pearl 5th String Nut for Banjo Price: $4.95

HOOKS & NUTS
230-HS Round Hooks & Nuts set of 24 Price: $24.95

230-HG Gold Plated Hooks & Nuts $53.95

231-H Single Hook Price: $0.75

231-N Single Nut Price: $0.75

231-F84 Flat Hooks & Hex Nuts
Brass nuts and 2 -1/2" steel hooks; 8-26 threads, nickel-plated.
Flat hook fits a grooved hoop...nut has rounded end with open hole.
Set of 24 hooks and nuts.
Price: $34.95

231-21F Single Flat Hook (nkl): $.95 each

231-22N Ball End Nut 5/16" (nkl): $.95 each

231-22B Bacon Style Nut - smaller (nkl) $1.15 each

"L" Bracket Shoes

Usually used for open back (without resonator) banjos.
They are used to hold bracket hooks in position around
rim; includes bolt and washer: for 3/4" rim.

245-905S "L" Bracket Shoes: $2.49 each

245-905ST SET of 24 "L" Bracket Shoes: $59.76

RESONATOR HARDWARE
Sold as a set. Includes 4 thumbscrews, 4 wall lugs, 4 "L" brackets and 8 screws.
223-950 Nickel Price: $29.95

223-950G Gold Price: $49.95

Single Pieces:
223-952S Thumbscrew - Nickel plated brass: $3.50 each

223-952G Thumbscrew - Gold Plated: $4.75 each

223-953S Resonator Wall Lug - fits above screw (nkl): $2.95 each

223-953G Resonator Wall Lug - fits above screw (gold): $4.75 each

223-954S Resonator L-bracket, one required for each thumbscrew, nickel-plated brass: $2.95 each

223-954G Resonator L-bracket (gold plated): $4.75 each

223-956 Screws for attaching L-brackets, two required per bracket, nickel-plated: $.80 pair of two

223-956G Screws for attaching L-brackets, GOLD: $1.45 pair of two

T Plate:
New style for use instead of L-bracket (223-955);
Attaches between flange and bracket nuts. (Excellent for 2 pc flange.)
229-124S T-Plate (nkl): $2.95 each

229-124G T-Plate (gold): $4.49 each

Tailpiece Hardware:
Replacement Tailpiece Bolt & Nut:
230-650A Tailpiece Bolt & Nut (nkl): $1.95 each

230-650G Tailpiece Bolt & Nut (gold): $3.95 each

Tailpiece Bracket - L shaped. Polished nickel-plated brass.
Use with standard "L" bracket type resonator hardware)
223-955PW Prewar, Gibson Style (Long): $2.95 each

223-955R Regular Length: $2.95 each

223-955G Gold Plated Tailpiece Bracket: $4.75 each

Tailpiece T Plate:
229-145N Tailpiece T-Plate (NKL): $2.95 each

229-145G Tailpiece T-Plate (GOLD): $4.49 each

Rim Rod Sets

242-171 Goldengate Coordinator Rods
2 rods, both 9 3/4"for banjos with single-piece flange
Your Price: $9.98

RIM ROD SET
For use with 3/4" wood rims; washers, nuts, and neck leg bolts included.
2 rod set nickel/plated brass-for use with standard 11" Mastertone-style rim outfits which use separate tailpiece bracket.

242-280SA Gibson style double rod set:
Used in Gibson reissue banjos--pre-war style-- 1 long rod, 1 short rod
Long nut on bottom rod List: $39.95...your price: $29.50

242-280G: Gibson-style with long nut--Gold plated $47.50

243-721S NECK LEG SCREW each (included with above rim rod sets) $1.19 (cents)

With regular bolt:
242-279N Regular Double Rim Rod Set: $24.95

Doesn't have long blot/nut on bottom rod like pre-war Gibson style

242-281 Single Top Rim Rod Set (usually used with bracket shoe-style rims) (nickel only): $23.95

GT-CR Gold Tone Rim Rods - two rods - nkl: $24.00

GT-LB Gold Tone Lag Bolts: must use with above rods ..$1.50

each

Old-time Neck attaching hardware

For "dowel-stick" neck-to-rim attachment. The neck brace tightens
the neck to the rim. The end bolt holds the tailpiece, and fastens
the dowel stick to the rim. The ferrule fits over the end of the
dowel stick. Nickel Plated.

223-958 Brace: $24.45 each

223-959 Ferrule: $6.25 each

223-960 End bolt: $4.55 each

LAG SCREWS for Neck
Go into Rim Rods. Need to order 2 for double rim rods, 1 for single rim rods.
31 Lag Screw for Regular Rim Rod (without long bolt - not Gibson style): $.75

each
242-721S Lag Screw for Gibson Style Double Rim Rod Set with long bolt: $.75

each

T-Wrench to adjust head tension.
233-650B For 1/4" Hex Nuts, (nkl): $5.49 each

(Gibson, Deering, Stelling, Gold Tone & most resonator banjos made today)

233-650BG For 1/4" Hex Nuts (GOLD Plated): $9.95 each

233-650A For 5/16" Hex Nuts: $5.49 each

Aw Gold Tone Adjustment Wrench: $4.25

(Note: does not work with DRUM-TORQUE WRENCH. Use the 1/4 T-wrench listed above with the DRUM-TORQUE WRENCH for Gold Tone.)

Click Here to see the DRUM-TORQUE WRENCH

Free Call 800-933-5362 for Credit Card Orders
(24 hr.) Fax: (479) 855-0451
Information & Foreign: (479) 855-0700

The Banjo Store
JDMC Janet Davis Music Company
13026 Highway 71 North
Bentonville, AR 72712

Shipping Rates

Order by Email

Instruments - Parts - Accessories - Books/Courses - Software - Recorders - Videos/DVD - CDs